Model assessment · Greenworks

Greenworks BL80L2516 80V 750 CFM handheld blower kit review

Exact Greenworks U.S. SKU 2435402 is an 80V handheld axial blower package with one 2.5 Ah battery and a 4A charger. The product summary and specification table say 750 CFM / 170 mph, while a generic feature bullet says 180 mph; treat the air-speed figure as unresolved. The exact page lists 6.5 lb tool-only and 8.82 lb with battery.

Sources checked 2026-10-24 · Our editorial approach

The standard 80V package is BL80L2516 / SKU 2435402. The open-box 2435402-OB and renewed 2435402-RC rows are condition/warranty variants, not new performance profiles. Preserve package and air-speed conflicts; exact image remains unresolved.

We may earn from qualifying purchases. Compare the exact model, size and package.

Greenworks BL80L2516 operator-manual diagram showing the handheld blower, tube and nozzle parts.
A Greenworks operator-manual diagram bearing BL80L2516 shows the handheld blower and nozzle parts. It is an illustration, not a photograph of a 2.5 Ah kit or renewed unit. Greenworks BL80L2516 operator-manual illustration, viewed through the ManualsFile public manual viewer.
A useful fit for

A current-reference U.S. buyer who wants a Greenworks 80V handheld blower kit with one included 2.5 Ah battery and charger, and whose published 750 CFM ceiling is adequate. Its published weight is 6.5 lb tool-only / 8.82 lb with battery; the page's 170/180 mph discrepancy, mode-specific runtime, sound/force and exact nozzle contents should not be treated as settled.

The main tradeoff

The exact package adds a 2.5 Ah 80V battery and 4A charger and the product page lists a battery-installed weight. The page conflicts between 170 and 180 mph, provides no test basis for its up-to-60-minute runtime or 75-minute recharge claim, and does not settle included nozzle shapes or charger model. It is a blower only, not a leaf vacuum/mulcher or trimmer kit.

Your needs, this model

Does it fit your priorities?

Does the 2.5 Ah one-battery kit meet a 750 CFM minimum and include its charger?

The exact SKU 2435402 page lists one 2.5 Ah battery and a 4A charger and publishes 750 CFM. These are exact package and manufacturer maximum claims, not runtime or yard-clearing guarantees.

Explore this need in the finder →
Can you use the listed 8.82 lb with-battery figure, or is a lower complete-weight ceiling essential?

Greenworks lists 8.82 lb with the battery and 6.5 lb tool-only. A 9 lb ready-to-use ceiling accommodates the listed battery-installed figure; an 8 lb ceiling does not. These are manufacturer figures, not our measurements.

Explore this need in the finder →
Do you need the blower to collect leaves into a bag, or is moving them the job?

The exact page lists a standalone blower package without a vacuum/mulcher or bag. It is suitable for a blower-only plan and does not meet an essential leaf-collection requirement.

Explore this need in the finder →

A high-air-volume handheld kit with one 2.5 Ah battery

The Greenworks BL80L2516 is the standard U.S. 80V blower kit identified by SKU 2435402. Its package is a handheld axial blower with one 2.5 Ah battery and a 4A charger; it is not the tool-only version, a backpack package, or a blower-vacuum. Greenworks lists a 750 CFM maximum and gives the exact machine both variable trigger control, a cruise-control lever and a Turbo button. Those are useful distinctions when you are choosing whether to feather airflow for lighter cleanup or hold a setting for a longer pass. They are manufacturer-listed features and output claims, not a measured yard-clearing result.

There is an air-speed conflict on the product page: its prominent summary and specification table say 170 mph, while a generic feature bullet says 180 mph. The 750 CFM figure is consistent across those fields, but I would not make an essential miles-per-hour threshold depend on this model until Greenworks clarifies which number belongs to the exact package. CFM and MPH describe different parts of airflow, and neither number alone tells you how fast a particular pile will move.

What the 2.5 Ah package changes

This kit includes a smaller labeled battery than Greenworks’ 4 Ah BL80L414 package, while its published 750 CFM maximum is below that model’s 770 CFM listing. That makes the choice practical rather than abstract: if 750 CFM is enough, you can consider this exact one-battery kit; if 770 CFM is a firm minimum, look at the BL80L414 or another supported option. The BL80L2515 is a nearby 700 CFM comparison with a 2.5 Ah kit. Check the exact model and suffix, because adjacent Greenworks 80V packages do not all include the same battery size or price.

The manufacturer says the included battery works with more than 75 Greenworks 80V tools. That is relevant if you already own equipment on that platform, but it does not mean an 80V battery fits Greenworks 40V or 60V tools. Match voltage and battery labels, and do not assume the charger in another box is the same 4A unit.

Greenworks publishes up to 60 minutes of runtime and 75 minutes to recharge. The page does not give a complete test setup for those figures, such as a consistent trigger setting, load, battery condition or whether the runtime represents maximum output. Turbo is therefore a feature to use when needed, not a promise of a full-hour high-output session. Plan around the stated battery package and your actual yard, rather than treating an “up to” runtime as a work guarantee.

Weight and handling deserve an honest check

The exact product page lists 6.5 pounds tool-only and 8.82 pounds with its battery. Those different bases matter: a bare-tool limit of 6.5 pounds is not the same as the weight you carry while working. If an 8.82-pound handheld setup is comfortable, this is one of the Greenworks 80V options with a published battery-installed figure; if a strict maximum is below that, it does not meet the stated limit. The page says there is no strap harness. Nothing in the listing suggests a backpack configuration, so do not select it if shoulder-supported carry is essential.

The page identifies nozzle attachments but does not itemize the exact nozzle shapes in the selected kit. Its two-page quick-start guide illustrates tapered and concentrator nozzles, then cautions that packaged parts vary by purchased model. That illustration is not enough to promise either specific nozzle is in SKU 2435402. If a particular nozzle is essential, confirm the package contents rather than relying on a picture or the general word “attachments.”

Where it fits—and where it does not

BL80L2516 is a dedicated blower. The exact package page lists no collection bag or trimmer, and the product is not described as a vacuum/mulcher. It can suit someone who wants to push leaves and debris into piles, but it is the wrong operating plan if you need to pick up, shred and bag leaves. For that job, compare a true blower-vacuum such as the Greenworks BL40L511, EGO LV5005 or ECHO ES-250; those are separate tools with their own weight, bag and battery or engine tradeoffs.

Greenworks lists four years of limited tool-and-battery coverage for the standard kit. Its linked “Owner’s Manual” is a two-page quick-start guide, not a full technical manual. Greenworks also lists open-box SKU 2435402-OB under model BL80L2516: the exact page says new/unused, repackaged after original-box damage, inspected/tested, with a 2.5 Ah battery and 4A charger. A generic feature line says 4 Ah, so verify the selected package if offered again. It showed Sold Out and a 90-day tool-and-battery warranty; Greenworks’ policy makes open-box sales final with no returns. The renewed SKU 2435402-RC is used/refurbished, may have cosmetic marks and has 90-day/final-sale terms too; it was also sold out. Neither is a separate performance profile or current buy match. The page-linked 16-page manual prints BLB479 / BL80L25161 rather than BL80L2516, but its 750 CFM / 170 MPH table matches the selected page’s specific table; generic copy says 180 MPH. No numeric sound rating or manual-listed blowing-force figure is established, so neither unknown meets a hard threshold.

Bottom line: Choose BL80L2516 when you want a current-listed 80V handheld kit with one 2.5 Ah battery and charger, and a 750 CFM published maximum suits the job. Choose a higher-output model if 751 CFM or more is essential; choose a blower-vac if leaf collection is essential. The exact 170/180 mph conflict, runtime conditions and unlisted nozzle shapes are reasons to avoid making a precision air-speed or accessory decision from general marketing copy alone.

Primary sources: Greenworks BL80L2516 / SKU 2435402 product page, its linked P0805978-00 Rev B quick-start guide, and the Customer Support Hub page 2; the open-box BL80L2516 / SKU 2435402-OB listing, its linked 16-page operator manual, the Greenworks return policy, and Customer Support Hub page 3; and the renewed BL80L2516 / SKU 2435402-RC listing and its linked manual.

Key details at a glance

Maximum published air volume750 CFM
Manufacturer-listed tool weight (check basis)6.5 lb
Batteries in this kit1
Capacity of each included battery2.5 Ah
Digital blower displayNo
Limited warrantyGreenworks lists a four-year limited tool and battery warranty for this package, subject to applicable terms and eligibility.
Exact package configurationExact Greenworks U.S. product page for BL80L2516 / SKU 2435402 lists the 80V blower, one 2.5 Ah battery, a 4A charger and owner's manual. It is not tool-only, a blower-vacuum or a trimmer combo; the exact nozzle set and charger model are not itemized.
String trimmer in kitNo
Leaf vacuum and mulching functionNo
Battery included in packageYes
Charger included in packageYes
Blower carrying styleHandheld
Backpack support harnessNo
Power sourceBattery
Manufacturer-listed weight8.82 lb
Weight measurement basisThe exact product page lists 6.5 lb tool-only and 8.82 lb with battery. These are manufacturer-listed weight bases, not independently measured values.

Use the exact model’s instructions for operating limits, supplied equipment and version differences.

Sources for this assessment

Match the blower to your yard and routine.

Compare the exact kit, controls, nozzle and carrying setup before choosing.