Toro 51621 UltraPlus corded blower vacuum review

UltraPlus adds collection and hardscape accessories

The Toro UltraPlus 51621 is a 120 V corded handheld blower-vac with a variable-speed knob, a metal impeller and tool-free conversion between blowing and vacuuming. Its exact U.S. page lists 340 CFM in blower mode, 405 CFM in vacuum mode and up to 260 mph. What separates the UltraPlus from the closely related Ultra 51619 is not a higher airflow figure on those pages. It is the package: Toro identifies an oscillating nozzle and Shredz-All shred ring as standard on the 51621, along with the power and concentrator inserts used for more focused passes.

The oscillating attachment sweeps air side-to-side to create a wider pass on hard surfaces without the user continuously moving a wrist. It is a specialized cleanup aid for paths, patios and driveway edges; it is not a claim that the blower moves more air than the 51619. The Shredz-All ring is used in vacuum mode, where Toro says it pulverizes debris into finer mulch and reduces bag-emptying frequency. The exact product page lists a maximum 97% debris reduction, but material type and condition affect the result. A wet pile or debris mix should not be assumed to achieve the same reduction.

Where it differs from the Ultra 51619

The 51619 and 51621 share the same published maximum airflow in their current exact product pages: 340 CFM blowing and 405 CFM vacuuming. Both list up to 260 mph and variable-speed adjustment. The 51621’s added oscillating nozzle and ring are worthwhile only if those attachments solve a real need. The 51619 already documents a metal impeller, a variable knob, blower/vacuum use and a set of tubes/inserts. If you mostly clear a few dry leaves from a short walkway, paying attention to add-on features may matter less than choosing a simpler tool or a blower-only model.

There is a specification conflict worth preserving. Toro’s current 51621 exact page lists 340 CFM blow, 405 CFM vacuum, 260 mph and a weight of 13 lb. Its older blower-vac table lists 350/410 CFM, 250 mph and 8.9 lb. The source does not explain the differences or define the weight basis. Use exact-page, mode-specific airflow as the conservative matching figure and keep complete operating weight unknown. Do not call the 13-lb figure a confirmed ready-to-use mass, nor mix the high CFM from one source with the weight from another to create a synthetic comparison.

It is still a corded outdoor tool

All of the convenience features depend on a suitable outdoor extension cord and an accessible outlet. The unit has a cord lock, but the cord still needs to be routed so it does not cross the area being cleared or snag around beds and furniture. Toro’s applicable manual, Form 3434-483 Rev C, covers the 51621 from serial 319022022 and up. It explains blower-tube setup, vacuum conversion, bag use and variable-speed operation. It also warns against use on wet surfaces or in rain and tells operators to unplug before changes or maintenance. This is not a battery-free way to get cordless reach.

In blower mode, the variable knob can reduce air when working near mulch or light objects, while higher settings address open hardscape. In vacuum mode, install the documented vacuum components and collect only material appropriate for the tool. Empty the bag before it becomes cumbersome and inspect for obstruction if performance changes. Toro’s manual cautions users to stop, unplug and check if the appliance vibrates or makes unusual noise. Protective eyewear and hearing protection are required by the manual; the exact product materials do not supply a measured sound-pressure value at 50 feet.

Who should choose it, and what remains unproven

This model suits a homeowner who wants both blowing and bag collection, values a continuously adjustable speed and expects to use the included oscillating nozzle or shred ring. It does not suit a buyer who insists on battery power, a verified ready-to-use weight ceiling, a quantified blowing-force minimum, an exact bag volume or an IP weather rating; Toro’s inspected product page and manual do not establish those facts. The 13-lb listed weight has no basis, and Toro’s older family table lists a different figure.

For a blower-only plan with higher listed air volume, compare Toro’s PowerJet F700 51624 at 725 CFM and 140 mph; it cannot vacuum leaves. For a complete corded blower-vac package that lacks the UltraPlus’s standard specialty attachments, compare the 51619, using its own exact-page specs and 88% maximum reduction claim. For cordless work, choose a battery model and assess its precise included pack rather than treating 51621 as portable just because it is handheld. Toro’s current page directs shoppers to dealers rather than confirming all retailers’ stock, so verify the exact 51621 designation and package details before purchase.

Sources: Toro’s 51621 product page, current parts/manual record, Form 3434-483 Rev C manual and blower-vac comparison page. Toro states that debris reduction varies with material and condition.